CNC TURNING

Comments

Post a Comment

Popular posts from this blog

What are most adjustable cutting factors in CNC turning machines???

Image
The three basic primary factors in any turning operation are spindle speed rpm), feed and depth of cut. These three are called adjustable cutting factors. Other factors are material types and types of tools. These two types are very important during the cutting operation. But the above three factors can be changed/adjusted by the operator at any time. Right Cutting Parameters Produces A Precise Output,Which Helps In Reducing Cycle Times, good surface finishing, And Machine Costs. The Speed And Motion Of The Cutting Tool Are Specified Through SeveralP That Can Be Modified For Different Operations Based Upon The Workpiece Material And Tool Size. What is the Feed, Cutting Speed, Spindle Speed and Depth of Cut? 1) . Spindle Speed In turning machine, the angular velocity of the spindle is called the "spindle speed". The unit of spindle speed is revolution per minute (rpm). 2). Cutting speed. Cutting speed is defined as the speed at which the cutting tool moves wi...
Read more

THE MAIN PARTS OF CNC TURNING MACHINE

Image
THE MAIN PARTS OF CNC TURNING MACHINE. Headstock Cnc Bed Cnc Chuck & Jaws Tailstock Tailstock Quill Foot Switch Or Foot Pedals Cnc Control Panel Tool Turret. HEADSTOCK Headstock of a cnc lathe machine have the main motor of cnc Turning machine which spindle. Chuck is mounted on this main spindle. the headstock covers are removed, so you can see the Main drive (Main Motor). CNC headstock CNC TURNING BED The Bed Is Designed To Support And Align X-z Axes And Cutting Tool Can Be Cut The Component On The Machine. Bed Is Designed In Two Ways: They Either Lie Flat Or At The Slant .    Most CNC Turning Have A Slant Bed Design, Providing The Operator Easy Access For Loading And Unloading Parts And Tools. It Also Allow The Chips And Coolent To Fall Away From The Cutting Area To The Bottom Of The Chip Conveyor. CNC bed CNC CHUCK AND JAWS The Chuck Is Mounted On The Spindle And Is Equipped With The Set Of Jaws To Grips The Component Which Ar...
Read more

What is TURNING ??

Turning is a form of machining, a material removal process, which is used to create rotational parts by cutting away unwanted material. The turning process requires a turning machine or lathe,  workpiece ,  fixture , and cutting tool. The workpiece is a piece of pre-shaped material that is secured to the fixture or chuck, which itself is attached to the turning machine, and allowed to rotate at high speeds. The tool is typically a single-point cutting tool that is also secured in the machine, although some operations make use of multi-point tools. The cutting tool feeds into the rotating workpiece and cuts away material in the form of small chips to create the desired shape. Turning is used to produce rotational, typically axi-symmetric, parts that have many features, such as holes, grooves, threads, tapers, various diameter steps, and even contoured surfaces . Turning is also commonly used as a secondary process to add or refine features on parts that were manufactured usi...
Read more